uSIDTower64 is a slim 100x100mm C64 in tower form, with MIDI interface and 14 RGB LEDs for automatic SID Effects, or for manually control (Basic/Assembler)
Included are 10 boards:
- Power (12V, S-VIDEO, placeholder for optional HDMI Out)
- Connections (Userport, Tapeport, 2x Gameports, Floppy/Serial Port)
- RAM (SRAM Adapter comaptible)
- Sound (3 SID Sockets)
At the top is the expansion port (vertical), so that a C64 module can be plugged in there vertically, as well as a controller chip with WS2811 RGB LEDs. The individual RGB LEDs can be controlled by a simple POKE command or via various selectable modes.
A Raspberry Pi Zero can be plugged directly onto the connections board, so that a Pi1541 drive is then "on-board".
Due to the built-in MIDI ports (DATEL compatible), this C64 is of course the ideal music machine with which you can immediately make music in the smallest of spaces.
All information about the new standard, as well as how to control the modes and LEDs, can be found in the "Informations" document
The following PCB boards are supplied (only the unassembled boards, without components):
(to transfer the firmware to the Teensy via USB, the Teensy Loader can be used: File -> "Open HEX File")
-> Midi Monitor
Components Ordering help (no claim to completeness, may be out of date):
Additional parts (not included):
Stacking Headers (23 mm, Picture 2): 14-16 pieces
Stacking Headers (19 mm, Picture 3): 2 pieces
Socket Connectors (12 mm, Picture 4): 2 pieces
Double Header Pins (20 mm, Picture 5): 3 pieces
Single Header Pins (19 mm, Picture 6): 2 pieces
WS2812 5050 RGB LEDs: 14 pieces (Picture 7)